Photo Product Weight, g Neck standard Diameter End product capacity In Box
Preform 79.9g
79,9±0,8
Bericap 48
Ø 48
3,0-5,0
2688
Preform 19.3g
19,3±0,2
РСО 1810
Ø 28
0,5
12576
Preform 58.0g
58,0±0,8
Bericap 48
Ø 48
3,0-4,0
3408
Preform 14.2g
14,2±0,2
РСО 1881
Ø 28
0,5
16896
Preform 65.0g
65,0±0,8
Bericap 48
Ø 48
3,0-5,0
3408
Preform 17.5g
17,5±0,2
РСО 1881
Ø 28
0,5
16896
Preform 84.0g
84,0±0,84
Bericap 48
Ø 48
5,0-6,0
2400
Preform 91.0g
91,0±0,91
Bericap 48
Ø 48
5,0-6,0
2656
Preform 100.0g
100,0±1,0
Bericap 48
Ø 48
6,0-7,0
2400
Preform 114.5g
114,5±1,4
Bericap 48
Ø 48
6,0-10,0
1904
Preform 110,0g
110,0±1,0
Bericap 48
Ø 48
6,0-10,0
1904
Preform 118g
118±1,4
Bericap 48
Ø 48
6,0-10,0
1904
Preform 16.3g
16,3±0,2
РСО 1881
Ø 28
0,5
16896
Preform 18,9g
18,9±0,2
РСО 1881
Ø 28
0,5
12576
Preform 19,9g
19,9±0,2
РСО 1881
Ø 28
0,5
12576
Preform 20.0g
20,0±0,3
РСО 1810
Ø 28
0,5
12576
Preform 20.75g
20,75±0,2
OIL 21/29
Ø 28
0,5-0,7
12600
Preform 21.8g
21,8±0,3
РСО 1881
Ø 28
0,5
12576
Preform 22.0g
22,0±0,3
РСО 1810
Ø 28
0,5
12576
Preform 23.2g
23,2±0,3
OIL 21/29
Ø 28
0,5-1,0
12600
Preform 24.5g
24,5±0,3
OIL 21/29
Ø 28
0,5-1,0
12600
Preform 25.4g
25,4±0,3
OIL 21/29
Ø 28
1,0
12600
Preform 26.05g
26,05±0,3
PCO 1881
Ø 28
1,0
10080
Preform 26.0g
26,0±0,3
РСО 1881
Ø 28
1,0
8712
Preform 26.2g
26,2±0,3
OIL 21/29
Ø 28
1,0
12600
Preform 27.8g
27,8±0,3
РСО 1881
Ø 28
1,0
8712
Preform 28.4g
28,4±0,3
РСО 1810
Ø 28
1,0
8712
Preform 28.5g
28,5±0,3
OIL 21/29
Ø 28
1,0
9600
Preform 28.9g
28,9±0,3
РСО 1881
Ø 28
1,0
8712
Preform 29.4g
29,4±0,3
РСО 1810
Ø 28
1,0
8712
Preform 29.7g
29,7±0,3
РСО 1881
Ø 28
1,0-1,5
8712
Preform 30.1g
30,1±0,3
РСО 1810
Ø 28
1,0-1,5
8712
Preform 31.25g
31,25±0,3
РСО 1881
Ø 28
1,0-1,5
8712
Preform 31.4g
31,4±0,3
OIL 21/29
Ø 28
1,0-1,5
9600
Preform 31.5g
31,5±0,3
РСО 1810
Ø 28
1,0-1,5
8712
Preform 32.3g
32,3±0,3
РСО 1881
Ø 28
1,0-1,5
8712
Preform 32.7g
32,7±0,3
РСО 1810
Ø 28
1,0-1,5
8712
Preform 34.1g
34,1±0,3
РСО 1881
Ø 28
1,0-1,5
8712
Preform 34.5g
34,5±0,3
РСО 1810
Ø 28
1,0-1,5
8712
Preform 35.7g
35,7±0,3
РСО 1881
Ø 28
1,5-2,0
7504
Preform 36.0g
36,0±0,3
РСО 1810
Ø 28
1,5-2,0
7504
Preform 36.7g
36,7±0,4
РСО 1881
Ø 28
1,5-2,0
7504
Preform 37.0g
37,0±0,4
РСО 1810
Ø 28
1,5-2,0
7504
Preform 38.9g
38,9±0,4
РСО 1881
Ø 28
1,5-2,5
7200
Preform 39.0g
39,0±0,4
РСО 1810
Ø 28
1,5-2,5
7200
Preform 42.0g
42,0±0,4
РСО 1881
Ø 28
2,0-3,0
7504
Preform 42.4g
42,4±0,4
РСО 1810
Ø 28
2,0-3,0
7504
Preform 43.7g
43,7±0,4
РСО 1881
Ø 28
2,0-3,0
7200
Preform 45.6g
45,6±0,4
РСО 1881
Ø 28
2,0-3,0
7200
Preform 45.8g
45,8±0,4
РСО 1810
Ø 28
2,0-3,0
7200
Preform 46,2g
46,2±0,4
OIL 39/29
Ø 36
1,8-3,0
5600
Preform 53.8g
53,8±0,4
OIL 39/29
Ø 36
1,8-3,0
5600
Preform 57.0g
57,0±0,7
JUICE 38мм
Ø 38
2,0-3,5
4200
Preform 66.0g
66,0±0,7
JUICE 38мм
Ø 38
2,0-5,0
3504
Preform 73.5g
73,5±0,7
JUICE 38мм
Ø 38
2,0-5,0
3703
Preform 76,1g
76,1±0,8
Bericap 48
Ø 48
3,0-5,0
2688
Preform 90.0g
90,0±1,2
OIL 48
Ø 48
5,0-6,0
2900
Preform 99.0g
99,0±1,4
OIL 48
Ø 48
5,0-6,0
2900
Преформа 2622
45,6±0,4
2622
Ø 38
2000

Preforms – bottle blow molding bases

pet preformsThe use of high-quality and safe packaging – is an important characteristic of any manufacturing enterprise. When it comes to the production of bottled products in plastic, the question arises of the availability of appropriate containers.

What are preforms?

Preforms – these are special polymer blanks for bottles or cans. As the name of the product suggests, the molds are made from polyethylene terephthalate – granular polymer. Distinctive features of the material – light weight, high barrier qualities, comfortable to use. For more information about the properties of PET, see the article:Polyethylene terephthalate for making bottles The transformation of the container takes place by injection molding. The workpiece is heated, and then placed in a semi-automatic machine for blowing.

Our company is engaged in the production of blanks for PET bottles of various sizes and configurations. The color, the degree of transparency of the future bottle is laid at the stage of mold production.

The range of preform weight and the corresponding volume of PET containers is presented in the table:

 

Preform weight, g PET bottle capacity, l
14.2-24.5 0.5
23.2-34.5 1.0
29.7-39.0 1.5
42-73.5 2.0
42-65 3.0
65-99 5.0
114.5 10,0

Scope of the product

preforms for bottlesThe physical and operational characteristics of polyethylene terephthalate have determined a wide range of applications for products made from this material.

Our plant produces preforms for bottles of different categories. For:

  • low alcohol drinks, beer;
  • strong alcohol;
  • water, soft drinks;
  • juices and juice products;
  • dairy and sour-milk products;
  • ketchups, sauces, mayonnaises;
  • edible vegetable oils;
  • liquid household chemicals and cosmetics;
  • medical products.

The choice of a certain type of PET preform depends on the scope of its application. You can always contact our specialists and choose the best option based on the installed equipment and a specific production task.

Classification of PET containers

PET blanks are distinguished by:

  • configurations – universal, shortened, thick-walled;
  • neck standard – Bericap (for water, drinks), PCO (for mineral water, beer), OIL (for oil), Juce (for juices).
  • neck diameter;
  • weight – varies depending on the required volume of the finished bottle;
  • color.

The number of molds in the package depends on the type of product. Preform Factory is a manufacturer of preforms for PET bottles, so we guarantee the highest quality of all products.

The variety of products is designed to meet the needs of consumers in different market segments.

See the article Technology for the production of plastic bottles about how PET bottles are produced.

Benefits for our clients

If you are still looking for a reliable manufacturer and wholesale supplier of pet preforms, we are ready to offer the most favorable terms of cooperation.

Our strengths:

  1. Using only certified and safe raw materials.
  2. Modern equipment.
  3. Diverse assortment.
  4. Individual approach and flexible solutions – you can buy pet preforms from us to solve any business problems.
  5. Quality packaging and convenient delivery. All products are packed in special corrugated boxes.

LLC "ZAVOD PREFORM" is a long-term partnership, reliability and a professional approach to work!

Prices for preforms for plastic bottles

 

⏩ Minimum price UAH 0.6
⏩ Maximum price UAH 4.20
⏩ Number of products 52
⏩ Top Product Preform РСО 1881 31.25 g

Frequently asked questions about preforms

⏩ Preforms for what volume of bottles do you produce?

The catalog contains preforms for 500 ml, 700 ml, 1, 1.5, 1.8, 2, 3, 5, 6 and 10 l PET bottles. We also produce custom-made preforms in accordance with the client's specifications.

⏩ What are the most popular preform colors?

Most of all Preform Factory customers order transparent color preforms. Blue, green, light blue and brown bottle blanks are also popular.

⏩ What guarantees of quality do the PET preforms produced by the factory have?

We strictly control the entire production process, from the selection of raw materials to the final product. Our preforms undergo rigorous quality checks and tests for strength, impact resistance, and durability. The products of the Preform Factory meet high industry standards.

⏩ How to order preforms for plastic bottles?

To place an order, you can contact us by phone at +38(056)790-04-19, send an email, or fill out the form on our website. When contacting us, please provide the necessary details such as quantity, requirements for shape and volume, as well as delivery deadlines. Our team will process your request and get in touch with you to confirm the details. We are ready to offer flexible terms of cooperation and promptly fulfill your order.

For more information, fill in the fields below
Feedback form
Just leave your details and we will contact you as soon as possible